LC4256C-3FT256AC
| Parameters | |
|---|---|
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.5mA |
| Number of I/O | 128 |
| Nominal Supply Current | 2.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 3 ns |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 160 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 3ns |
| Number of Logic Elements/Blocks | 16 |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
LC4256C-3FT256AC Overview
There are 256 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is embedded in the 256-LBGA package.It is equipped with 128I/O ports.It is programmed that device terminations will be 256 .This electrical component has a terminal position of 0.The power source is powered by 1.8Vvolts.This part is in the family [0].It is recommended that the chip be packaged by Tray.Ensure its reliability by operating at [0].There should be a Surface Mounton the chip.The ispMACH? 4000Cseries FPGA is one of these types.There are 256pins on the chip.The device can also be used to find [0].Its related parts can be found in the [0].The supply voltage should be maintained at 1.8V for high efficiency.For storing data, it is recommended to use [0].Surface Mountis used to mount this electronic component.A voltage of 1.95V is the maximum supply voltage for this device.A minimum supply voltage of 1.65V is required for this device to operate.A total of 16logic elements/blocks are present.A total of 160programmable I/Os are available.It is recommended that the maximal frequency be lower than 322MHz.Input signals are detected using 4dedicated inputs.
LC4256C-3FT256AC Features
256-LBGA package
128 I/Os
The operating temperature of 0°C~90°C TJ
256 pin count
LC4256C-3FT256AC Applications
There are a lot of Lattice Semiconductor Corporation LC4256C-3FT256AC CPLDs applications.
- Timing control
- ToR/Aggregation/Core Switch and Router
- Power automation
- Address decoding
- INTERRUPT SYSTEM
- Storage Cards and Storage Racks
- ROM patching
- I/O PORTS (MCU MODULE)
- STANDARD SERIAL INTERFACE UART
- Programmable polarity
