LC4256C-3T176C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 384.6MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.5mA |
| Number of I/O | 128 |
| Nominal Supply Current | 2.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 3 ns |
| Number of Logic Elements/Cells | 16 |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4256C-3T176C Overview
In the mobile phone network, there are 256macro cells, which are cells with high-power antennas and towers.There is a 176-LQFP package containing it.In this case, there are 128 I/Os programmed.Terminations of devices are set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.It is powered by a voltage of 1.8V volts.This part is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.During operation, the operating temperature is kept at 0°C~90°C TJ to ensure its reliability.It is recommended that Surface Mountholds the chip in place.As part of the ispMACH? 4000Cseries, it is a type of FPGA.There are 176pins on the chip.The device can also be used to find [0].You can find its related parts in the [0].Optimal efficiency requires a supply voltage of [0].Data storage is performed using [0].It is mounted by Surface Mount.The device has a pinout of [0].With a maximum supply voltage of [0], it operates.The minimal supply voltage is 1.65V.Programmable I/Os are counted up 100.This frequency is 384.6MHz.Input signals are detected by 4dedicated inputs.A fundamental building block of logic consists of 16logic elements/cells.
LC4256C-3T176C Features
176-LQFP package
128 I/Os
The operating temperature of 0°C~90°C TJ
176 pin count
176 pins
LC4256C-3T176C Applications
There are a lot of Lattice Semiconductor Corporation LC4256C-3T176C CPLDs applications.
- D/T registers and latches
- USB Bus
- Protection relays
- INTERRUPT SYSTEM
- DMA control
- Voltage level translation
- DDC INTERFACE
- Software Configuration of Add-In Boards
- Synchronous or asynchronous mode
- Wide Vin Industrial low power SMPS
