LC4256C-3TN100C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4256 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.5mA |
| Number of I/O | 64 |
| Nominal Supply Current | 2.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 3 ns |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 176 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 3ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4256C-3TN100C Overview
There are 256 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).You can find it in package [0].The device is programmed with 64 I/O ports.The device is programmed with 100 terminations.This electrical part is wired with a terminal position of QUAD.The device is powered by a voltage of 1.8V volts.This part is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.It operates with the operating temperature of 0°C~90°C TJ to ensure its reliability.Surface Mountshould be used for mounting the chip.The FPGA belongs to the ispMACH? 4000C series.It is programmed with 100 pins.This device is also capable of displaying [0].LC4256contains its related parts.High efficiency requires the supply voltage to be maintained at [0].EEPROM is adopted for storing data.A Surface Mountis mounted on this electronic component.100pins are included in its design.There is a maximum supply voltage of 1.95Vwhen the device is operating.A minimum supply voltage of 1.65V is required for it to operate.There are 16 logic elements/blocks.A programmable I/O count of 176 has been recorded.It should be below 322MHzat the maximal frequency.The input signals are detected by 10dedicated inputs.
LC4256C-3TN100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4256C-3TN100C Applications
There are a lot of Lattice Semiconductor Corporation LC4256C-3TN100C CPLDs applications.
- Custom shift registers
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Preset swapping
- Field programmable gate
- Battery operated portable devices
- Multiple DIP Switch Replacement
- Address decoding
- USB Bus
- PLC analog input modules
- STANDARD SERIAL INTERFACE UART
