LC4256C-5FN256BI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4256 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.5mA |
| Number of I/O | 160 |
| Nominal Supply Current | 2.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 16 |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 5ns |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
LC4256C-5FN256BI Overview
There are 256 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is contained in package [0].There are 160 I/Os programmed in it.256terminations are programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.There is 1.8V voltage supply for this device.The part is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.To ensure reliability, the device operates at a temperature of [0].There should be a Surface Mounton the chip.In FPGA terms, it is a type of ispMACH? 4000Cseries FPGA.In this chip, the 256pins are programmed.When using this device, YESis also available.According to the LC4256, its related parts can be found.For high efficiency, the supply voltage should be maintained at [0].Data storage is performed using [0].Surface Mountmounts this electronic component.A voltage of 1.95V is the maximum supply voltage for this device.It operates with the minimal supply voltage of 1.65V.In total, there are 100programmable I/Os.The maximal frequency should be lower than 322MHz.There are 4 dedicated inputs used to detect the status of input signals.There are 16 logic elements/cells on the device.
LC4256C-5FN256BI Features
256-BGA package
160 I/Os
The operating temperature of -40°C~105°C TJ
256 pin count
LC4256C-5FN256BI Applications
There are a lot of Lattice Semiconductor Corporation LC4256C-5FN256BI CPLDs applications.
- Handheld digital devices
- Address decoders
- Storage Cards and Storage Racks
- State machine control
- I/O expansion
- Portable digital devices
- High speed graphics processing
- Software Configuration of Add-In Boards
- Timing control
- DDC INTERFACE
