LC4256C-5T100C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.5mA |
| Number of I/O | 64 |
| Nominal Supply Current | 2.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 176 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4256C-5T100C Overview
There are 256 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).There is a 100-LQFP package containing it.In this case, there are 64 I/Os programmed.Terminations of devices are set to [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.An electrical supply voltage of 1.8V is used to power it.It is included in Programmable Logic Devices.Trayshould be used to package the chip.The temperature at which it operates is set to 0°C~90°C TJin order to ensure its reliability.It is mounted in the way of Surface Mount.The FPGA belongs to the ispMACH? 4000C series.In this chip, the 100pins are programmed.This device also displays [0].The LC4256indicates that related parts can be found.For high efficiency, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].The electronic component is mounted by Surface Mount.There are 100 pins on the device.With a maximum supply voltage of [0], it operates.With a minimal supply voltage of [0], it operates.There are a total of 16 logic elements or blocks.A programmable I/O count of 176 has been recorded.The maximum frequency should not exceed 322MHz.To detect input signals, there are 10 dedicated inputs.
LC4256C-5T100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4256C-5T100C Applications
There are a lot of Lattice Semiconductor Corporation LC4256C-5T100C CPLDs applications.
- USB Bus
- Discrete logic functions
- Software Configuration of Add-In Boards
- Portable digital devices
- Random logic replacement
- High speed graphics processing
- Boolean function generators
- POWER-SAVING MODES
- Synchronous or asynchronous mode
- Address decoding
