LC4256C-5T100I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.5mA |
| Number of I/O | 64 |
| Nominal Supply Current | 2.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 16 |
| Max Frequency | 322MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 5ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4256C-5T100I Overview
A mobile phone network consists of 256macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).The product is contained in a 100-LQFP package.There are 64 I/Os programmed in it.The termination of a device is set to [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.An electrical supply voltage of 1.8V is used to power it.The part is included in Programmable Logic Devices.As a result, it is packaged as Tray.During operation, the operating temperature is kept at -40°C~105°C TJ to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.FPGAs belonging to the ispMACH? 4000Cseries contain this type of chip.A chip with 100pins is programmed.This device can also display [0].There are related parts in [0].High efficiency requires a voltage supply of [0].In general, it is recommended to store data in [0].This device is mounted by Surface Mount.There are 100 pins embedded in the device.It operates at a maximum supply voltage of 1.95V volts.Despite its minimal supply voltage of [0], it is capable of operating.It should be below 322MHzat the maximal frequency.There are 10 dedicated inputs used to detect the status of input signals.An elementary building block consists of 16logic elements/cells.
LC4256C-5T100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
LC4256C-5T100I Applications
There are a lot of Lattice Semiconductor Corporation LC4256C-5T100I CPLDs applications.
- Software-Driven Hardware Configuration
- Multiple DIP Switch Replacement
- DMA control
- Dedicated input registers
- ToR/Aggregation/Core Switch and Router
- Code converters
- Boolean function generators
- Handheld digital devices
- Power Meter SMPS
- Discrete logic functions
