LC4256C-5T176I
| Parameters | |
|---|---|
| Length | 24mm |
| Width | 24mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.5mA |
| Number of I/O | 128 |
| Nominal Supply Current | 2.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 208 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
LC4256C-5T176I Overview
The mobile phone network has 256 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).176-LQFPis the package in which it resides.There are 128 I/Os on the board.The termination of a device is set to [0].This electrical component has a terminal position of 0.It is powered by a voltage of 1.8V volts.The part is included in Programmable Logic Devices.As a result, it is packaged as Tray.To ensure its reliability, the operating temperature is set to [0].Mount the chip by Surface Mount.FPGAs belonging to the ispMACH? 4000Cseries contain this type of chip.Chips are programmed with 176 pins.If you use this device, you will also find [0].The LC4256contains its related parts.If high efficiency is desired, the supply voltage should be kept at [0].It is adopted to store data in [0].A Surface Mountis mounted on this electronic component.There are 176pins on it.A voltage of 1.95V is the maximum supply voltage for this device.It operates with the minimal supply voltage of 1.65V.There are 16 logic elements or blocks present.Currently, there are 208 Programmable I/Os available.The maximum frequency should not exceed 322MHz.Input signals are detected by 4dedicated inputs.
LC4256C-5T176I Features
176-LQFP package
128 I/Os
The operating temperature of -40°C~105°C TJ
176 pin count
176 pins
LC4256C-5T176I Applications
There are a lot of Lattice Semiconductor Corporation LC4256C-5T176I CPLDs applications.
- Storage Cards and Storage Racks
- Random logic replacement
- High speed graphics processing
- Bootloaders for FPGAs
- White goods (Washing, Cold, Aircon ,...)
- Configurable Addressing of I/O Boards
- Power Meter SMPS
- Synchronous or asynchronous mode
- Dedicated input registers
- Digital designs
