LC4256C-75FT256AI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.5mA |
| Number of I/O | 128 |
| Nominal Supply Current | 2.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 160 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 16 |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4256C-75FT256AI Overview
In the mobile phone network, there are 256macro cells, which are cells with high-power antennas and towers.It is part of the 256-LBGA package.There are 128 I/Os programmed in it.There is a 256terminations set on devices.This electrical part has a terminal position of BOTTOMand is connected to the ground.The device is powered by a voltage of 1.8V volts.It is included in Programmable Logic Devices.It is packaged in the way of Tray.It operates with the operating temperature of -40°C~105°C TJ to ensure its reliability.Mount the chip by Surface Mount.In FPGA terms, it is a type of ispMACH? 4000Cseries FPGA.256pins are programmed on the chip.When using this device, YEScan also be found.The LC4256shows its related parts.If high efficiency is to be achieved, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].Surface Mountis the mounting point of this electronic part.A voltage of 1.95V is the maximum supply voltage for this device.A minimum supply voltage of 1.65V is required for this device to operate.This logic block consists of 16logic elements.Currently, there are 160 Programmable I/Os available.Ideally, the maximal frequency should be lower than 322MHz Hz.To detect the status of input signals, there are 4dedicated inputs.
LC4256C-75FT256AI Features
256-LBGA package
128 I/Os
The operating temperature of -40°C~105°C TJ
256 pin count
LC4256C-75FT256AI Applications
There are a lot of Lattice Semiconductor Corporation LC4256C-75FT256AI CPLDs applications.
- Multiple DIP Switch Replacement
- TIMERS/COUNTERS
- White goods (Washing, Cold, Aircon ,...)
- POWER-SAVING MODES
- Bootloaders for FPGAs
- ON-CHIP OSCILLATOR CIRCUIT
- Protection relays
- Programmable power management
- Power up sequencing
- Voltage level translation
