LC4256C-75T176C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.5mA |
| Number of I/O | 128 |
| Nominal Supply Current | 2.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 96 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4256C-75T176C Overview
There are 256 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is contained in package [0].The device is programmed with 128 I/Os.176terminations have been programmed into the device.This electrical part is wired with a terminal position of QUAD.The power source is powered by 1.8Vvolts.This part is part of the family [0].Trayis the packaging method.A reliable operation is ensured by the operating temperature of [0].It is mounted in the way of Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4000C series.176pins are programmed on the chip.When using this device, YEScan also be found.The LC4256shows its related parts.The supply voltage should be maintained at 1.8V for high efficiency.In general, it is recommended to store data in [0].Surface Mountmounts this electronic component.The device has a pinout of [0].There is a maximum supply voltage of 1.95Vwhen the device is operating.Normally, it operates with a voltage of 1.65VV as its minimum supply voltage.This logic element/block contains 16logic elements.A total of 96programmable I/Os are available.Ideally, the maximal frequency should be lower than 322MHz Hz.Input signals are detected using 4dedicated inputs.
LC4256C-75T176C Features
176-LQFP package
128 I/Os
The operating temperature of 0°C~90°C TJ
176 pin count
176 pins
LC4256C-75T176C Applications
There are a lot of Lattice Semiconductor Corporation LC4256C-75T176C CPLDs applications.
- I2C BUS INTERFACE
- Reset swapping
- Address decoding
- State machine control
- Multiple Clock Source Selection
- Code converters
- Parity generators
- Auxiliary Power Supply Isolated and Non-isolated
- Bootloaders for FPGAs
- INTERRUPT SYSTEM
