LC4256C-75TN176C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4256 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.5mA |
| Number of I/O | 128 |
| Nominal Supply Current | 2.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 16 |
| Max Frequency | 322MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4256C-75TN176C Overview
A mobile phone network consists of 256macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).You can find it in package [0].The device is programmed with 128 I/O ports.There are 176 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The terminal position of this electrical component is QUAD.The power source is powered by 1.8Vvolts.There is a part in the family [0].It is packaged in the way of Tray.Due to its reliability, it is operated at a temperature of [0].It is mounted in the way of Surface Mount.FPGAs belonging to the ispMACH? 4000Cseries contain this type of chip.There are 176 pins on the chip.The device can also be used to find [0].Its related parts can be found in the [0].In order to achieve high efficiency, the supply voltage should be maintained at [0].Data storage is performed using [0].The electronic component is mounted by Surface Mount.There are 176 pins embedded in the device.It operates at a maximum supply voltage of 1.95V volts.In order for it to operate, a supply voltage of 1.65Vis required.It should be below 322MHzat the maximal frequency.Input signals are detected by 4dedicated inputs.A fundamental building block of logic consists of 16logic elements/cells.
LC4256C-75TN176C Features
176-LQFP package
128 I/Os
The operating temperature of 0°C~90°C TJ
176 pin count
176 pins
LC4256C-75TN176C Applications
There are a lot of Lattice Semiconductor Corporation LC4256C-75TN176C CPLDs applications.
- Digital multiplexers
- DMA control
- Digital designs
- High speed graphics processing
- Power automation
- Portable digital devices
- Timing control
- Address decoders
- State machine control
- Preset swapping
