LC4256V-10T100I
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12.5mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Programmable I/O | 96 |
| Number of Logic Blocks (LABs) | 36 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4256V-10T100I Overview
This network has 256macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).In the 100-LQFPpackage, you will find it.It is equipped with 64I/O ports.It is programmed to terminate devices at [0].The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.It is powered by a voltage of 3.3V volts.This part is part of the family [0].As a result, it is packaged as Tray.Ensure its reliability by operating at [0].Surface Mountshould be used for mounting the chip.FPGAs belonging to the ispMACH? 4000Vseries contain this type of chip.The chip is programmed with 100 pins.It is also characterized by YES.In accordance with the [0], its related parts are listed.High efficiency requires a voltage supply of [0].It is recommended to store data in [0].In this case, Surface Mountis used to mount the electronic component.A total of 100pins are provided on this board.This device operates at a voltage of 3.6Vas its maximum supply voltage.The minimal supply voltage is 3V.16logic elements/blocks exist.A programmable I/O count of 96 has been recorded.There can be 125MHz frequency achieved.The program consists of 36 logic blocks (LABs).There are 10 dedicated inputs used to detect the status of input signals.
LC4256V-10T100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
36 logic blocks (LABs)
LC4256V-10T100I Applications
There are a lot of Lattice Semiconductor Corporation LC4256V-10T100I CPLDs applications.
- Custom shift registers
- Timing control
- Pattern recognition
- Custom state machines
- STANDARD SERIAL INTERFACE UART
- Digital multiplexers
- TIMERS/COUNTERS
- Boolean function generators
- Power Meter SMPS
- Storage Cards and Storage Racks
