LC4256V-10T144I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12.5mA |
| Number of I/O | 96 |
| Nominal Supply Current | 12.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Programmable I/O | 128 |
| Number of Logic Blocks (LABs) | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4256V-10T144I Overview
There are 256 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is contained in package [0].This device has 96 I/O ports programmed into it.It is programmed to terminate devices at [0].Its terminal position is QUAD.Power is supplied by a voltage of 3.3V volts.There is a part included in Programmable Logic Devices.Package the chip by Tray.It operates with the operating temperature of -40°C~105°C TJ to ensure its reliability.It is recommended to mount the chip by Surface Mount.In terms of FPGAs, it belongs to the ispMACH? 4000V series.It has 144pins programmed.If this device is used, you will also be able to find [0].The LC4256shows its related parts.Optimal efficiency requires a supply voltage of [0].EEPROM is adopted for storing data.The electronic component is mounted by Surface Mount.A total of 144pins are provided on this board.A voltage of 3.6V is the maximum supply voltage for this device.Initially, it requires a voltage of 3Vas the minimum supply voltage.A total of 16logic elements/blocks are present.Programmable I/Os are counted up 128.In this case, 125MHzis the frequency that can be achieved.There are 36logic blocks (LABs) that make up its basic building block.Input signals are detected using 4dedicated inputs.
LC4256V-10T144I Features
144-LQFP package
96 I/Os
The operating temperature of -40°C~105°C TJ
144 pin count
144 pins
36 logic blocks (LABs)
LC4256V-10T144I Applications
There are a lot of Lattice Semiconductor Corporation LC4256V-10T144I CPLDs applications.
- High speed graphics processing
- Address decoders
- State machine control
- Auxiliary Power Supply Isolated and Non-isolated
- Handheld digital devices
- Complex programmable logic devices
- PULSE WIDTH MODULATION (PWM)
- POWER-SAVING MODES
- Battery operated portable devices
- LED Lighting systems
