LC4256V-10TN100I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Weight | 657.000198mg |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12.5mA |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Blocks (LABs) | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4256V-10TN100I Overview
A mobile phone network consists of 256macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).100-LQFPis the package in which it resides.There are 64 I/Os on the board.There is a 100terminations set on devices.This electrical part has a terminal position of QUADand is connected to the ground.An electrical supply voltage of 3.3V is used to power it.It is a part of the family [0].It is recommended to package the chip by Tray.A reliable operation is ensured by the operating temperature of [0].Ideally, the chip should be mounted by Surface Mount.It is a type of FPGA belonging to the ispMACH? 4000V series.100pins are programmed on the chip.If you use this device, you will also find [0].The LC4256shows its related parts.High efficiency requires a voltage supply of [0].It is adopted to store data in [0].In this case, Surface Mountis used to mount the electronic component.The device has a pinout of [0].A maximum supply voltage of 3.6Vis used in its operation.With a minimal supply voltage of [0], it operates.There are a total of 16 logic elements or blocks.It is possible to achieve a frequency of 125MHz.In its simplest form, it consists of 36 logic blocks (LABs).A total of 10dedicated inputs are available for detecting the status of input signals.
LC4256V-10TN100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
36 logic blocks (LABs)
LC4256V-10TN100I Applications
There are a lot of Lattice Semiconductor Corporation LC4256V-10TN100I CPLDs applications.
- Bootloaders for FPGAs
- Portable digital devices
- Pattern recognition
- Address decoders
- Multiple Clock Source Selection
- DMA control
- Wide Vin Industrial low power SMPS
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Custom state machines
- INTERRUPT SYSTEM
