LC4256V-3T144C
| Parameters | |
|---|---|
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 384.6MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12.5mA |
| Number of I/O | 96 |
| Nominal Supply Current | 12.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 3 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 272 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
LC4256V-3T144C Overview
In the mobile phone network, there are 256macro cells, which are cells with high-power antennas and towers.It is contained in package [0].This device has 96 I/O ports programmed into it.144terminations have been programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.An electrical supply voltage of 3.3V is used to power it.There is a part in the family [0].It is recommended that the chip be packaged by Tray.To ensure reliability, the device operates at a temperature of [0].Chips should be mounted by Surface Mount.The ispMACH? 4000Vseries comprises this type of FPGA.With 144pins programmed, the chip is ready to use.If you use this device, you will also find [0].There are related parts in [0].High efficiency requires a voltage supply of [0].In general, it is recommended to store data in [0].Surface Mountis the mounting point of this electronic part.It is designed with 144 pins.It operates at a maximum supply voltage of 3.6V volts.The device is designed to operate with a minimal supply voltage of 3VV.This logic block consists of 16logic elements.In total, there are 272programmable I/Os.This frequency can be achieved at 384.6MHz.The status of input signals is detected by 4dedicated inputs.There are 36 logic elements/cells on the device.
LC4256V-3T144C Features
144-LQFP package
96 I/Os
The operating temperature of 0°C~90°C TJ
144 pin count
144 pins
LC4256V-3T144C Applications
There are a lot of Lattice Semiconductor Corporation LC4256V-3T144C CPLDs applications.
- Boolean function generators
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Parity generators
- ToR/Aggregation/Core Switch and Router
- High speed graphics processing
- Software-driven hardware configuration
- D/T registers and latches
- Software Configuration of Add-In Boards
- Digital designs
- Handheld digital devices
