LC4256V-5FT256AC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Frequency | 227.27MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12.5mA |
| Number of I/O | 128 |
| Nominal Supply Current | 12.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 160 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 16 |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4256V-5FT256AC Overview
There are 256 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).There is a 256-LBGA package containing it.The device is programmed with 128 I/O ports.There are 256 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.BOTTOMis the terminal position of this electrical part.It is powered from a supply voltage of 3.3V.There is a part included in Programmable Logic Devices.The chip should be packaged by Tray.A reliable operation is ensured by the operating temperature of [0].Surface Mountshould be used for mounting the chip.It is a type of FPGA belonging to the ispMACH? 4000V series.Chips are programmed with 256 pins.This device also displays [0].The LC4256shows its related parts.If high efficiency is to be achieved, the supply voltage should be maintained at [0].In order to store data, EEPROMis used.Surface Mountis used to mount this electronic component.With a maximum supply voltage of [0], it operates.The minimal supply voltage is 3V.There are a total of 16 logic elements or blocks.There are 160 Programmable I/Os.The frequency that can be achieved is 227.27MHz.Input signals are detected by 4dedicated inputs.Basic building blocks have 36logic elements.
LC4256V-5FT256AC Features
256-LBGA package
128 I/Os
The operating temperature of 0°C~90°C TJ
256 pin count
LC4256V-5FT256AC Applications
There are a lot of Lattice Semiconductor Corporation LC4256V-5FT256AC CPLDs applications.
- Power Meter SMPS
- Power automation
- Synchronous or asynchronous mode
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- DMA control
- Timing control
- Address decoding
- Digital multiplexers
- I/O expansion
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
