LC4256V-5FT256AI
| Parameters | |
|---|---|
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12.5mA |
| Number of I/O | 128 |
| Nominal Supply Current | 12.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 16 |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 160 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 5ns |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Operating Temperature | -40°C~105°C TJ |
LC4256V-5FT256AI Overview
A mobile phone network consists of 256macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).You can find it in package [0].As you can see, this device has 128 I/O ports programmed into it.There are 256 terminations programmed into the device.Its terminal position is BOTTOM.It is powered from a supply voltage of 3.3V.The part belongs to Programmable Logic Devices family.Trayshould be used for packaging the chip.It operates with the operating temperature of -40°C~105°C TJ to ensure its reliability.Ensure that the chip is mounted by Surface Mount.In terms of FPGAs, it belongs to the ispMACH? 4000V series.There are 256 pins on the chip.When using this device, YEScan also be found.In accordance with the [0], its related parts are listed.Optimal efficiency requires a supply voltage of [0].Data is stored using [0].The electronic part is mounted by Surface Mount.In this case, the maximum supply voltage is 3.6V.It operates with the minimal supply voltage of 3V.A total of 160 Programmable I/Os are available.322MHzis the maximum frequency.A total of 4dedicated inputs are available for detecting the status of input signals.The fundamental building block consists of 16logic elements/cells.
LC4256V-5FT256AI Features
256-LBGA package
128 I/Os
The operating temperature of -40°C~105°C TJ
256 pin count
LC4256V-5FT256AI Applications
There are a lot of Lattice Semiconductor Corporation LC4256V-5FT256AI CPLDs applications.
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Auxiliary Power Supply Isolated and Non-isolated
- DDC INTERFACE
- ON-CHIP OSCILLATOR CIRCUIT
- Reset swapping
- Software-driven hardware configuration
- Boolean function generators
- POWER-SAVING MODES
- Battery operated portable devices
- DMA control
