LC4256V-5T100I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 227.27MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12.5mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 388 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4256V-5T100I Overview
This network has 256macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).The product is contained in a 100-LQFP package.There are 64 I/Os on the board.100terminations are programmed into the device.The terminal position of this electrical component is QUAD.A voltage of 3.3V is used as the power supply for this device.It is a part of family [0].Ideally, the chip should be packaged by Tray.Ensure its reliability by operating at [0].It is recommended to mount the chip by Surface Mount.As part of the ispMACH? 4000Vseries, it is a type of FPGA.It is equipped with 100 pin count.This device can also display [0].There are related parts in [0].In order to achieve high efficiency, the supply voltage should be maintained at [0].In order to store data, EEPROMis used.The electronic component is mounted by Surface Mount.The 100pins are designed into the board.In this case, the maximum supply voltage is 3.6V.A minimum supply voltage of 3V is required for it to operate.There are 16 logic elements/blocks.In total, there are 388programmable I/Os.You can achieve 227.27MHzfrequencies.It has 10dedicated inputs for detecting input signals.An elementary building block consists of 36logic elements/cells.
LC4256V-5T100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
LC4256V-5T100I Applications
There are a lot of Lattice Semiconductor Corporation LC4256V-5T100I CPLDs applications.
- State machine control
- Interface bridging
- Dedicated input registers
- INTERRUPT SYSTEM
- High speed graphics processing
- Complex programmable logic devices
- Code converters
- Bootloaders for FPGAs
- DMA control
- White goods (Washing, Cold, Aircon ,...)
