LC4256V-5T144I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12.5mA |
| Number of I/O | 96 |
| Nominal Supply Current | 12.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 16 |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 272 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 5ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4256V-5T144I Overview
The mobile phone network has 256 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).It is part of the 144-LQFP package.There are 96 I/Os programmed in it.144terminations have been programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.An electrical supply voltage of 3.3V is used to power it.It is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.A reliable operation is ensured by the operating temperature of [0].It is mounted in the way of Surface Mount.In terms of FPGAs, it belongs to the ispMACH? 4000V series.The chip is programmed with 144 pins.The device can also be used to find [0].You can find its related parts in the [0].It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.EEPROM is adopted for storing data.This electronic part is mounted in the way of Surface Mount.There are 144 pins on the device.A voltage of 3.6V is the maximum supply voltage for this device.The device is designed to operate with a minimal supply voltage of 3VV.There are 272 programmable I/Os in this system.There should be a lower maximum frequency than 322MHz.It has 4dedicated inputs for detecting input signals.There are 16 logic elements/cells to form a fundamental building block.
LC4256V-5T144I Features
144-LQFP package
96 I/Os
The operating temperature of -40°C~105°C TJ
144 pin count
144 pins
LC4256V-5T144I Applications
There are a lot of Lattice Semiconductor Corporation LC4256V-5T144I CPLDs applications.
- Digital systems
- Discrete logic functions
- Preset swapping
- Programmable polarity
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Configurable Addressing of I/O Boards
- Protection relays
- DMA control
- USB Bus
- Power automation
