LC4256V-5T176I
| Parameters | |
|---|---|
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 227.27MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 176 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12.5mA |
| Number of I/O | 128 |
| Nominal Supply Current | 12.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Number of Logic Elements/Cells | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
LC4256V-5T176I Overview
There are 256 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.In the 176-LQFPpackage, you will find it.As a result, it has 128 I/O ports programmed.The device is programmed with 176 terminations.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.A voltage of 3.3Vprovides power to the device.This part is in the family [0].Ideally, the chip should be packaged by Tray.To ensure its reliability, the operating temperature is set to [0].Ideally, the chip should be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4000V series.There are 176pins on the chip.This device also displays [0].You can find its related parts in the [0].Optimal efficiency requires a supply voltage of [0].In general, it is recommended to store data in [0].In this case, it is mounted by Surface Mount.There are 176 pins on the device.A maximum voltage of 3.6Vis required for operation.Initially, it requires a voltage of 3Vas the minimum supply voltage.There are 16 logic elements/blocks, which are fundamental building blocks of field-programmable gate array (FPGA) technology.This can be achieved at a frequency of 227.27MHz.A total of 4dedicated inputs are available for the purpose of detecting input signals.An elementary building block consists of 36logic elements/cells.
LC4256V-5T176I Features
176-LQFP package
128 I/Os
The operating temperature of -40°C~105°C TJ
176 pin count
176 pins
LC4256V-5T176I Applications
There are a lot of Lattice Semiconductor Corporation LC4256V-5T176I CPLDs applications.
- Programmable polarity
- POWER-SAVING MODES
- Timing control
- Field programmable gate
- I2C BUS INTERFACE
- Address decoding
- Power Meter SMPS
- PULSE WIDTH MODULATION (PWM)
- Address decoders
- Software-driven hardware configuration
