LC4256V-5TN100I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 227.27MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12.5mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Number of Programmable I/O | 272 |
| Number of Logic Blocks (LABs) | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4256V-5TN100I Overview
There are 256 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The item is enclosed in a 100-LQFP package.The device is programmed with 64 I/O ports.It is programmed that device terminations will be 100 .Its terminal position is QUAD.A voltage of 3.3Vprovides power to the device.It is included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.The temperature at which it operates is set to -40°C~105°C TJin order to ensure its reliability.It is recommended that Surface Mountholds the chip in place.In FPGA terms, it is a type of ispMACH? 4000Vseries FPGA.A chip with 100pins is programmed.It is also characterized by YES.The LC4256indicates that its related parts can be found.A high level of efficiency can be achieved by maintaining the supply voltage at [0].EEPROM is adopted for storing data.This device is mounted by Surface Mount.There are 100 pins embedded in the device.A maximum supply voltage of 3.6Vis used in its operation.It is powered by 3Vas its minimum supply voltage.16logic blocks/elements are present.A total of 272programmable I/Os are available.There is a maximum frequency of 227.27MHz.Its basic building block is composed of 36 logic blocks (LABs).Input signals are detected by 10dedicated inputs.
LC4256V-5TN100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
36 logic blocks (LABs)
LC4256V-5TN100I Applications
There are a lot of Lattice Semiconductor Corporation LC4256V-5TN100I CPLDs applications.
- Programmable polarity
- Voltage level translation
- Portable digital devices
- Digital systems
- D/T registers and latches
- PLC analog input modules
- ToR/Aggregation/Core Switch and Router
- I/O expansion
- Custom shift registers
- Storage Cards and Storage Racks
