LC4256V-75FTN256AI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn95.5Ag4.0Cu0.5) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4256 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12.5mA |
| Number of I/O | 128 |
| Nominal Supply Current | 12.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 160 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 16 |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4256V-75FTN256AI Overview
256 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is part of the 256-LBGA package.There are 128 I/Os programmed in it.There is a 256terminations set on devices.Its terminal position is BOTTOM.It is powered by a voltage of 3.3V volts.It is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].The chip should be mounted by Surface Mount.The ispMACH? 4000Vseries FPGA is one of these types.With 256pins programmed, the chip is ready to use.This device can also display [0].Its related parts can be found in the [0].A high level of efficiency can be achieved by maintaining the supply voltage at [0].It is recommended that data be stored in [0].Surface Mountis the mounting point of this electronic part.There is a maximum supply voltage of 3.6Vwhen the device is operating.With a minimal supply voltage of [0], it operates.16logic elements/blocks exist.There are 160 Programmable I/Os.It is recommended that the maximum frequency be less than 322MHz.There are 4 dedicated inputs used to detect the status of input signals.
LC4256V-75FTN256AI Features
256-LBGA package
128 I/Os
The operating temperature of -40°C~105°C TJ
256 pin count
LC4256V-75FTN256AI Applications
There are a lot of Lattice Semiconductor Corporation LC4256V-75FTN256AI CPLDs applications.
- Configurable Addressing of I/O Boards
- TIMERS/COUNTERS
- Power up sequencing
- Boolean function generators
- Handheld digital devices
- Multiple Clock Source Selection
- Voltage level translation
- DMA control
- POWER-SAVING MODES
- ToR/Aggregation/Core Switch and Router
