LC4256V-75T100C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12.5mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 48 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4256V-75T100C Overview
There are 256 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The item is enclosed in a 100-LQFP package.The device is programmed with 64 I/Os.Terminations of devices are set to [0].This electrical component has a terminal position of 0.The device is powered by a voltage of 3.3V volts.There is a part in the family [0].It is recommended to package the chip by Tray.To ensure its reliability, the operating temperature is set to [0].Ideally, the chip should be mounted by Surface Mount.The ispMACH? 4000Vseries comprises this type of FPGA.A chip with 100pins is programmed.If you use this device, you will also find [0].In accordance with the [0], its related parts are listed.High efficiency requires the supply voltage to be maintained at [0].For storing data, it is recommended to use [0].In this case, it is mounted by Surface Mount.The device has a pinout of [0].It operates at a maximum supply voltage of 3.6V volts.It operates with the minimal supply voltage of 3V.A total of 16logic elements/blocks are present.Programmable I/Os are counted up 48.It is possible to achieve a frequency of 178.57MHz.To detect the status of input signals, there are 10dedicated inputs.In order to form a fundamental building block, there are 36logic elements/cells.
LC4256V-75T100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4256V-75T100C Applications
There are a lot of Lattice Semiconductor Corporation LC4256V-75T100C CPLDs applications.
- POWER-SAVING MODES
- Boolean function generators
- State machine control
- Preset swapping
- I2C BUS INTERFACE
- Code converters
- Timing control
- State machine design
- Parity generators
- DMA control
