LC4256V-75TN100C
| Parameters | |
|---|---|
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 16 |
| Height | 1.4mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Weight | 657.000198mg |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 322MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12.5mA |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Blocks (LABs) | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
LC4256V-75TN100C Overview
There are 256 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).100-LQFPis the package in which it resides.The device has 64inputs and outputs.Terminations of devices are set to [0].This electrical part is wired with a terminal position of QUAD.Power is provided by a supply voltage of 3.3V volts.It belongs to the family [0].It is packaged in the way of Tray.During operation, the operating temperature is kept at 0°C~90°C TJ to ensure its reliability.There should be a Surface Mounton the chip.FPGAs belonging to the ispMACH? 4000Vseries contain this type of chip.There are 100pins on the chip.It is also characterized by YES.The LC4256shows its related parts.Optimal efficiency requires a supply voltage of [0].For storing data, it is recommended to use [0].The electronic component is mounted by Surface Mount.The device is designed with pins [0].There is a maximum supply voltage of 3.6V.Despite its minimal supply voltage of [0], it is capable of operating.A logic element or block has 16elements.A frequency of 322MHzcan be achieved.The logic block consists of 36 l logic blocks (LABs).Input signals are detected using 10dedicated inputs.
LC4256V-75TN100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
36 logic blocks (LABs)
LC4256V-75TN100C Applications
There are a lot of Lattice Semiconductor Corporation LC4256V-75TN100C CPLDs applications.
- Configurable Addressing of I/O Boards
- DDC INTERFACE
- Preset swapping
- PULSE WIDTH MODULATION (PWM)
- Digital systems
- Address decoders
- Digital multiplexers
- I2C BUS INTERFACE
- Field programmable gate
- Synchronous or asynchronous mode
