LC4256V-75TN100I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Weight | 657.000198mg |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12.5mA |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4256V-75TN100I Overview
A mobile phone network consists of 256macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is part of the 100-LQFP package.There are 64 I/Os programmed in it.There is a 100terminations set on devices.This electrical part has a terminal position of QUADand is connected to the ground.The power supply voltage is 3.3V.The part belongs to Programmable Logic Devices family.Trayshould be used for packaging the chip.The temperature at which it operates is set to -40°C~105°C TJin order to ensure its reliability.It is recommended that Surface Mountholds the chip in place.The FPGA belongs to the ispMACH? 4000V series.It is programmed with 100 pins.When using this device, YESis also available.You can find its related parts in the [0].The supply voltage should be maintained at 3.3V for high efficiency.For data storage, EEPROMis adopted.Surface Mountis used to mount this electronic component.There are 100pins on it.A voltage of 3.6V is the maximum supply voltage for this device.The device is designed to operate with a minimal supply voltage of 3VV.16logic blocks/elements are present.This frequency can be achieved at 178.57MHz.It has 10dedicated inputs for detecting input signals.The fundamental building block consists of 36logic elements/cells.
LC4256V-75TN100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
LC4256V-75TN100I Applications
There are a lot of Lattice Semiconductor Corporation LC4256V-75TN100I CPLDs applications.
- DMA control
- STANDARD SERIAL INTERFACE UART
- Field programmable gate
- Bootloaders for FPGAs
- I/O PORTS (MCU MODULE)
- Software-Driven Hardware Configuration
- Reset swapping
- DDC INTERFACE
- Page register
- Interface bridging
