LC4256V-75TN144E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | -40°C~130°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4256 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12.5mA |
| Number of I/O | 96 |
| Nominal Supply Current | 12.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 44 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4256V-75TN144E Overview
In the mobile phone network, there are 256macro cells, which are cells with high-power antennas and towers.The product is contained in a 144-LQFP package.There are 96 I/Os on the board.Devices are programmed with terminations of [0].There is a QUADterminal position on the electrical part in question.The power supply voltage is 3.3V.This part is part of the family [0].It is recommended that the chip be packaged by Tray.The temperature at which it operates is set to -40°C~130°C TJin order to ensure its reliability.It is recommended to mount the chip by Surface Mount.It belongs to the ispMACH? 4000Vseries of FPGAs.It is equipped with 144 pin count.It is also characterized by YES.The LC4256indicates that its related parts can be found.The supply voltage should be maintained at 3.3V for high efficiency.It is adopted to store data in [0].The electronic component is mounted by Surface Mount.This board has 144 pins.There is a maximum supply voltage of 3.6Vwhen the device is operating.A minimum supply voltage of 3V is required for this device to operate.There are 16 logic elements/blocks.A total of 44 Programmable I/Os are available.The frequency that can be achieved is 178.57MHz.A total of 4dedicated inputs are available for detecting the status of input signals.In order to form a fundamental building block, there are 36 logic elements or cells.
LC4256V-75TN144E Features
144-LQFP package
96 I/Os
The operating temperature of -40°C~130°C TJ
144 pin count
144 pins
LC4256V-75TN144E Applications
There are a lot of Lattice Semiconductor Corporation LC4256V-75TN144E CPLDs applications.
- Battery operated portable devices
- Parity generators
- Storage Cards and Storage Racks
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Synchronous or asynchronous mode
- ROM patching
- Software-driven hardware configuration
- Complex programmable logic devices
- PLC analog input modules
- Wide Vin Industrial low power SMPS
