LC4256V-75TN176E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | -40°C~130°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4256 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12.5mA |
| Number of I/O | 128 |
| Nominal Supply Current | 12.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 16 |
| Number of Programmable I/O | 44 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4256V-75TN176E Overview
There are 256 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.176-LQFPis the package in which it resides.There are 128 I/Os on the board.There are 176 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.Power is supplied by a voltage of 3.3V volts.There is a part included in Programmable Logic Devices.Trayis the packaging method.A reliable operation is ensured by the operating temperature of [0].Surface Mountshould be used for mounting the chip.It belongs to the ispMACH? 4000Vseries of FPGAs.It is programmed with 176 pins.This device can also display [0].There are related parts in [0].If high efficiency is to be achieved, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].This electronic part is mounted in the way of Surface Mount.176pins are included in its design.A maximum voltage of 3.6Vis required for operation.A minimum supply voltage of 3V is required for it to operate.There are 44 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. You can achieve 178.57MHzfrequencies.The status of input signals is detected by 4dedicated inputs.In order to form a fundamental building block, there are 16logic elements/cells.
LC4256V-75TN176E Features
176-LQFP package
128 I/Os
The operating temperature of -40°C~130°C TJ
176 pin count
176 pins
LC4256V-75TN176E Applications
There are a lot of Lattice Semiconductor Corporation LC4256V-75TN176E CPLDs applications.
- DMA control
- Interface bridging
- PLC analog input modules
- Discrete logic functions
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Software Configuration of Add-In Boards
- Page register
- Auxiliary Power Supply Isolated and Non-isolated
- Address decoders
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
