LC4256ZC-45MN132C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 132-LFBGA, CSPBGA |
| Number of Pins | 132 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 132 |
| ECCN Code | EAR99 |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 277.78MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4256 |
| Pin Count | 132 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 341μA |
| Number of I/O | 96 |
| Nominal Supply Current | 341μA |
| Memory Type | EEPROM |
| Propagation Delay | 4.5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 44 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 6 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.35mm |
| Length | 8mm |
| Width | 8mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4256ZC-45MN132C Overview
256macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.The item is packaged with 132-LFBGA, CSPBGA.There are 96 I/Os on the board.It is programmed that device terminations will be 132 .This electrical part has a terminal position of BOTTOMand is connected to the ground.The power source is powered by 1.8Vvolts.It is a part of the family [0].Trayis the packaging method.The temperature at which it operates is set to 0°C~90°C TJin order to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4000Z series.It is programmed with 132 pins.This device can also display [0].You can find its related parts in the [0].In order to maintain high efficiency, the supply voltage should be maintained at [0].In order to store data, EEPROMis used.A Surface Mountis mounted on this electronic component.132pins are included in its design.In this case, the maximum supply voltage is 1.9V.The device is designed to operate with a minimal supply voltage of 1.7VV.16logic elements/blocks exist.In total, there are 44programmable I/Os.You can achieve 277.78MHzfrequencies.To detect input signals, there are 6 dedicated inputs.There are 36 logic elements/cells to form a fundamental building block.
LC4256ZC-45MN132C Features
132-LFBGA, CSPBGA package
96 I/Os
The operating temperature of 0°C~90°C TJ
132 pin count
132 pins
LC4256ZC-45MN132C Applications
There are a lot of Lattice Semiconductor Corporation LC4256ZC-45MN132C CPLDs applications.
- Timing control
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Interface bridging
- Code converters
- Cross-Matrix Switch
- ON-CHIP OSCILLATOR CIRCUIT
- I/O PORTS (MCU MODULE)
- INTERRUPT SYSTEM
- Page register
