LC4256ZC-75M132C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 132-LFBGA, CSPBGA |
| Number of Pins | 132 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 132 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 132 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 341μA |
| Number of I/O | 96 |
| Nominal Supply Current | 341μA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 16 |
| Max Frequency | 200MHz |
| Number of Programmable I/O | 44 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 6 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.35mm |
| Length | 8mm |
| Width | 8mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4256ZC-75M132C Overview
There are 256 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is embedded in the 132-LFBGA, CSPBGA package.As you can see, this device has 96 I/O ports programmed into it.There is a 132terminations set on devices.BOTTOMis the terminal position of this electrical part.A voltage of 1.8V is used as the power supply for this device.The part is included in Programmable Logic Devices.Trayshould be used to package the chip.To ensure its reliability, the operating temperature is set to [0].It is recommended that the chip be mounted by Surface Mount.The FPGA belongs to the ispMACH? 4000Z series.There are 132 pins on the chip.The device can also be used to find [0].The LC4256can be used to identify its related parts.It is recommended that the supply voltage be kept at 1.8Vto maximize efficiency.Data is stored using [0].This electronic part is mounted in the way of Surface Mount.132pins are included in its design.It operates at a maximum supply voltage of 1.9V volts.A minimum supply voltage of 1.7V is required for this device to operate.There are 44 programmable I/Os in this system.It is important to make sure that the maximum frequency is less than 200MHz.The status of input signals is determined by 6dedicated inputs.A fundamental building block of logic consists of 16logic elements/cells.
LC4256ZC-75M132C Features
132-LFBGA, CSPBGA package
96 I/Os
The operating temperature of 0°C~90°C TJ
132 pin count
132 pins
LC4256ZC-75M132C Applications
There are a lot of Lattice Semiconductor Corporation LC4256ZC-75M132C CPLDs applications.
- Boolean function generators
- ROM patching
- I2C BUS INTERFACE
- Field programmable gate
- PULSE WIDTH MODULATION (PWM)
- Wide Vin Industrial low power SMPS
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- STANDARD SERIAL INTERFACE UART
- I/O expansion
- State machine control
