LC4256ZC-75MN132C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 132-LFBGA, CSPBGA |
| Number of Pins | 132 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 132 |
| ECCN Code | EAR99 |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4256 |
| Pin Count | 132 |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 341μA |
| Number of I/O | 96 |
| Nominal Supply Current | 341μA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Programmable I/O | 48 |
| Number of Logic Blocks (LABs) | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 6 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.35mm |
| Length | 8mm |
| Width | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4256ZC-75MN132C Overview
There are 256 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.You can find it in package [0].It is equipped with 96I/O ports.Devices are programmed with terminations of [0].This electrical part is wired with a terminal position of BOTTOM.A voltage of 1.8Vprovides power to the device.It is a part of the family [0].It is packaged in the way of Tray.Ensure its reliability by operating at [0].Mount the chip by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4000Z series.The chip is programmed with 132 pins.The device can also be used to find [0].The LC4256shows its related parts.The supply voltage should be maintained at 1.8V for high efficiency.Data is stored using [0].This electronic part is mounted in the way of Surface Mount.It is designed with 132 pins.This device operates at a voltage of 1.9V when the maximum supply voltage is applied.Normally, it operates with a voltage of 1.7VV as its minimum supply voltage.There are 16 logic elements/blocks, which are fundamental building blocks of field-programmable gate array (FPGA) technology.A total of 48Programmable I/Os are present.You can achieve 178.57MHzfrequencies.The program consists of 36 logic blocks (LABs).To detect the status of input signals, there are 6dedicated inputs.
LC4256ZC-75MN132C Features
132-LFBGA, CSPBGA package
96 I/Os
The operating temperature of 0°C~90°C TJ
132 pin count
132 pins
36 logic blocks (LABs)
LC4256ZC-75MN132C Applications
There are a lot of Lattice Semiconductor Corporation LC4256ZC-75MN132C CPLDs applications.
- Digital designs
- Digital systems
- Parity generators
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Cross-Matrix Switch
- STANDARD SERIAL INTERFACE UART
- Interface bridging
- Battery operated portable devices
- Boolean function generators
- Dedicated input registers
