LC4256ZC-75T100C
| Parameters | |
|---|---|
| Memory Type | EEPROM |
| Propagation Delay | 4.5 ns |
| Max Frequency | 200MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Weight | 657.000198mg |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 341μA |
| Number of I/O | 64 |
LC4256ZC-75T100C Overview
256macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.It is embedded in the 100-LQFP package.It is equipped with 64I/O ports.There are 100 terminations programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.It is powered from a supply voltage of 1.8V.This part is included in Programmable Logic Devices.It is recommended to package the chip by Tray.To ensure its reliability, the operating temperature is set to [0].There should be a Surface Mounton the chip.In this case, it is a type of FPGA belonging to the ispMACH? 4000Z series.It has 100pins programmed.The device can also be used to find [0].You can find its related parts in the [0].High efficiency requires a voltage supply of [0].In general, it is recommended to store data in [0].Surface Mountis used to mount this electronic component.A total of 100pins are provided on this board.This device operates at a voltage of 1.9Vas its maximum supply voltage.With a minimal supply voltage of [0], it operates.In total, there are 16 logic elements/blocks.It is recommended that the maximal frequency be lower than 200MHz.It has 10dedicated inputs for detecting input signals.
LC4256ZC-75T100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4256ZC-75T100C Applications
There are a lot of Lattice Semiconductor Corporation LC4256ZC-75T100C CPLDs applications.
- Voltage level translation
- STANDARD SERIAL INTERFACE UART
- Timing control
- Programmable power management
- Random logic replacement
- Digital systems
- ToR/Aggregation/Core Switch and Router
- INTERRUPT SYSTEM
- I/O PORTS (MCU MODULE)
- Software-Driven Hardware Configuration
