LC4256ZC-75T100E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~130°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 341μA |
| Number of I/O | 64 |
| Nominal Supply Current | 341μA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 16 |
| Max Frequency | 200MHz |
| Number of Programmable I/O | 48 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4256ZC-75T100E Overview
256 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.In the 100-LQFPpackage, you will find it.The device is programmed with 64 I/Os.It is programmed to terminate devices at [0].This electrical part is wired with a terminal position of QUAD.It is powered from a supply voltage of 1.8V.It belongs to the family [0].It is recommended to package the chip by Tray.The temperature at which it operates is set to -40°C~130°C TJin order to ensure its reliability.Chips should be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4000Z series.A chip with 100pins is programmed.It is also characterized by YES.The LC4256indicates that related parts can be found.If high efficiency is to be achieved, the supply voltage should be maintained at [0].It is recommended to store data in [0].This electronic part is mounted in the way of Surface Mount.The device is designed with pins [0].It operates at a maximum supply voltage of 1.9V volts.The minimal supply voltage is 1.6V.A total of 48Programmable I/Os are present.Ideally, the maximal frequency should be lower than 200MHz Hz.To detect the status of input signals, there are 10dedicated inputs.As a fundamental building block, there are 16 logic elements/cells.
LC4256ZC-75T100E Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~130°C TJ
100 pin count
100 pins
LC4256ZC-75T100E Applications
There are a lot of Lattice Semiconductor Corporation LC4256ZC-75T100E CPLDs applications.
- I/O expansion
- POWER-SAVING MODES
- Portable digital devices
- Software-driven hardware configuration
- Custom shift registers
- Code converters
- Protection relays
- Digital designs
- Custom state machines
- Synchronous or asynchronous mode
