LC4256ZC-75T100I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 100 |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 341μA |
| Number of I/O | 64 |
| Nominal Supply Current | 341μA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Programmable I/O | 48 |
| Number of Logic Blocks (LABs) | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4256ZC-75T100I Overview
256 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is part of the 100-LQFP package.As a result, it has 64 I/O ports programmed.100terminations are programmed into the device.There is a QUADterminal position on the electrical part in question.There is 1.8V voltage supply for this device.The part is included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.It operates with the operating temperature of -40°C~105°C TJ to ensure its reliability.It is recommended to mount the chip by Surface Mount.In FPGA terms, it is a type of ispMACH? 4000Zseries FPGA.Chips are programmed with 100 pins.When using this device, YESis also available.The LC4256contains its related parts.If high efficiency is desired, the supply voltage should be kept at [0].In general, it is recommended to store data in [0].Surface Mountmounts this electronic component.The device is designed with pins [0].In this case, the maximum supply voltage is 1.9V.With a minimal supply voltage of [0], it operates.This logic block consists of 16logic elements.A total of 48programmable I/Os are available.The frequency that can be achieved is 178.57MHz.Its basic building block is composed of 36 logic blocks (LABs).A total of 10dedicated inputs are available for the purpose of detecting input signals.
LC4256ZC-75T100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
36 logic blocks (LABs)
LC4256ZC-75T100I Applications
There are a lot of Lattice Semiconductor Corporation LC4256ZC-75T100I CPLDs applications.
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- ON-CHIP OSCILLATOR CIRCUIT
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Preset swapping
- Bootloaders for FPGAs
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Battery operated portable devices
- Programmable power management
- Field programmable gate
- INTERRUPT SYSTEM
