LC4256ZC-75T176C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 341μA |
| Number of I/O | 128 |
| Nominal Supply Current | 341μA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Max Frequency | 200MHz |
| Number of Programmable I/O | 44 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4256ZC-75T176C Overview
There are 256 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).There is a 176-LQFP package containing it.There are 128 I/Os programmed in it.The termination of a device is set to [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.An electrical supply voltage of 1.8V is used to power it.The part is included in Programmable Logic Devices.Trayshould be used to package the chip.Due to its reliability, it is operated at a temperature of [0].The chip should be mounted by Surface Mount.As part of the ispMACH? 4000Zseries, it is a type of FPGA.A chip with 176pins is programmed.If you use this device, you will also find [0].There are related parts in [0].In order to achieve high efficiency, the supply voltage should be maintained at [0].Data storage is performed using [0].A Surface Mountis mounted on this electronic component.A total of 176pins are provided on this board.A maximum voltage of 1.9Vis required for operation.Normally, it operates with a voltage of 1.7VV as its minimum supply voltage.16logic blocks/elements are present.A total of 44Programmable I/Os are present.It is recommended that the maximum frequency be less than 200MHz.The status of input signals is detected by 4dedicated inputs.
LC4256ZC-75T176C Features
176-LQFP package
128 I/Os
The operating temperature of 0°C~90°C TJ
176 pin count
176 pins
LC4256ZC-75T176C Applications
There are a lot of Lattice Semiconductor Corporation LC4256ZC-75T176C CPLDs applications.
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- PULSE WIDTH MODULATION (PWM)
- Software-Driven Hardware Configuration
- Random logic replacement
- State machine control
- Software-driven hardware configuration
- Wide Vin Industrial low power SMPS
- I/O expansion
- Configurable Addressing of I/O Boards
- Digital multiplexers
