LC4256ZC-75T176E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | -40°C~130°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 341μA |
| Number of I/O | 128 |
| Nominal Supply Current | 341μA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 16 |
| Max Frequency | 200MHz |
| Number of Programmable I/O | 48 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4256ZC-75T176E Overview
256macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.There is a 176-LQFP package containing it.The device is programmed with 128 I/O ports.There is a 176terminations set on devices.QUADis the terminal position of this electrical part.The power supply voltage is 1.8V.It is a part of the family [0].Package the chip by Tray.A reliable operation is ensured by the operating temperature of [0].It is recommended to mount the chip by Surface Mount.As part of the ispMACH? 4000Zseries, it is a type of FPGA.Chips are programmed with 176 pins.It is also characterized by YES.The LC4256indicates that related parts can be found.A high level of efficiency can be achieved by maintaining the supply voltage at [0].Data is stored using [0].In this case, Surface Mountis used to mount the electronic component.There are 176pins on it.It operates with the maximal supply voltage of 1.9V.Normally, it operates with a voltage of 1.6VV as its minimum supply voltage.A total of 48programmable I/Os are available.It is important to make sure that the maximum frequency is less than 200MHz.The input signals are detected by 4dedicated inputs.The fundamental building block consists of 16logic elements/cells.
LC4256ZC-75T176E Features
176-LQFP package
128 I/Os
The operating temperature of -40°C~130°C TJ
176 pin count
176 pins
LC4256ZC-75T176E Applications
There are a lot of Lattice Semiconductor Corporation LC4256ZC-75T176E CPLDs applications.
- Battery operated portable devices
- Wide Vin Industrial low power SMPS
- Multiple DIP Switch Replacement
- Page register
- Software Configuration of Add-In Boards
- I2C BUS INTERFACE
- D/T registers and latches
- PLC analog input modules
- Multiple Clock Source Selection
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
