LC4256ZC-75T176I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 341μA |
| Number of I/O | 128 |
| Nominal Supply Current | 341μA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 16 |
| Max Frequency | 200MHz |
| Number of Programmable I/O | 44 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4256ZC-75T176I Overview
256macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.It is part of the 176-LQFP package.This device has 128 I/O ports programmed into it.There are 176 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Its terminal position is QUAD.There is 1.8V voltage supply for this device.There is a part in the family [0].It is packaged in the way of Tray.During operation, the operating temperature is kept at -40°C~105°C TJ to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.In terms of FPGAs, it belongs to the ispMACH? 4000Z series.The chip is programmed with 176 pins.It is also possible to find YESwhen using this device.The LC4256shows its related parts.The supply voltage should be maintained at 1.8V for high efficiency.For storing data, it is recommended to use [0].This device is mounted by Surface Mount.The 176pins are designed into the board.It operates with the maximal supply voltage of 1.9V.It operates with the minimal supply voltage of 1.7V.A total of 44 Programmable I/Os are available.It is important to make sure that the maximum frequency is less than 200MHz.The status of input signals is determined by 4dedicated inputs.As a fundamental building block, there are 16 logic elements/cells.
LC4256ZC-75T176I Features
176-LQFP package
128 I/Os
The operating temperature of -40°C~105°C TJ
176 pin count
176 pins
LC4256ZC-75T176I Applications
There are a lot of Lattice Semiconductor Corporation LC4256ZC-75T176I CPLDs applications.
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Code converters
- Wide Vin Industrial low power SMPS
- Software-Driven Hardware Configuration
- Digital multiplexers
- PLC analog input modules
- I2C BUS INTERFACE
- LED Lighting systems
- Address decoders
- Random logic replacement
