LC4256ZC-75TN100E
| Parameters | |
|---|---|
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 100 |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 341μA |
| Number of I/O | 64 |
| Nominal Supply Current | 341μA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 44 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~130°C TJ |
| Packaging | Tray |
LC4256ZC-75TN100E Overview
There are 256 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).In the 100-LQFPpackage, you will find it.In this case, there are 64 I/Os programmed.The device is programmed with 100 terminations.This electrical component has a terminal position of 0.A voltage of 1.8Vprovides power to the device.It is a part of family [0].As a result, it is packaged as Tray.Due to its reliability, it is operated at a temperature of [0].Chips should be mounted by Surface Mount.The FPGA belongs to the ispMACH? 4000Z series.With 100pins programmed, the chip is ready to use.If this device is used, you will also be able to find [0].In accordance with the [0], its related parts are listed.Optimal efficiency requires a supply voltage of [0].In general, it is recommended to store data in [0].Surface Mountmounts this electronic component.The 100pins are designed into the board.A voltage of 1.9V is the maximum supply voltage for this device.It operates with the minimal supply voltage of 1.6V.16logic blocks/elements are present.In total, there are 44programmable I/Os.It is possible to achieve a frequency of 178.57MHz.A total of 10dedicated inputs are available for the purpose of detecting input signals.There are 36 logic elements/cells to form a fundamental building block.
LC4256ZC-75TN100E Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~130°C TJ
100 pin count
100 pins
LC4256ZC-75TN100E Applications
There are a lot of Lattice Semiconductor Corporation LC4256ZC-75TN100E CPLDs applications.
- STANDARD SERIAL INTERFACE UART
- Handheld digital devices
- INTERRUPT SYSTEM
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Software Configuration of Add-In Boards
- ToR/Aggregation/Core Switch and Router
- Random logic replacement
- Reset swapping
- Wide Vin Industrial low power SMPS
- Synchronous or asynchronous mode
