LC4256ZC-75TN100I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 100 |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 341μA |
| Number of I/O | 64 |
| Nominal Supply Current | 341μA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 540 |
| Number of Programmable I/O | 48 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Number of Logic Elements/Blocks | 16 |
| Height | 1.4mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4256ZC-75TN100I Overview
256macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.A 100-LQFP package contains the item.As you can see, this device has 64 I/O ports programmed into it.100terminations have been programmed into the device.Its terminal position is QUAD.An electrical supply voltage of 1.8V is used to power it.It is included in Programmable Logic Devices.As a result, it is packaged as Tray.Ensure its reliability by operating at [0].It is recommended that the chip be mounted by Surface Mount.FPGAs belonging to the ispMACH? 4000Zseries contain this type of chip.It is equipped with 100 pin count.When using this device, YEScan also be found.The LC4256indicates that related parts can be found.A high level of efficiency can be achieved by maintaining the supply voltage at [0].Data is stored using [0].This device is mounted by Surface Mount.A total of 100pins are provided on this board.A maximum voltage of 1.9Vis required for operation.A minimum supply voltage of 1.7V is required for it to operate.This logic block consists of 16logic elements.A total of 48programmable I/Os are available.There is a maximum frequency of 178.57MHz.Input signals are detected by 10dedicated inputs.A fundamental building block consists of 540logic elements/cells.
LC4256ZC-75TN100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
LC4256ZC-75TN100I Applications
There are a lot of Lattice Semiconductor Corporation LC4256ZC-75TN100I CPLDs applications.
- Power automation
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Reset swapping
- Software-driven hardware configuration
- Battery operated portable devices
- Discrete logic functions
- Wide Vin Industrial low power SMPS
- DMA control
- USB Bus
- Software-Driven Hardware Configuration
