LC4256ZC-75TN176C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4256 |
| Pin Count | 176 |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 341μA |
| Number of I/O | 128 |
| Nominal Supply Current | 341μA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Programmable I/O | 44 |
| Number of Logic Blocks (LABs) | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4256ZC-75TN176C Overview
In the mobile phone network, there are 256macro cells, which are cells with high-power antennas and towers.In the 176-LQFPpackage, you will find it.There are 128 I/Os on the board.There are 176 terminations programmed into the device.Its terminal position is QUAD.A voltage of 1.8V is used as the power supply for this device.The part belongs to Programmable Logic Devices family.Trayshould be used to package the chip.It operates with the operating temperature of 0°C~90°C TJ to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4000Z series.A chip with 176pins is programmed.If you use this device, you will also find [0].According to the LC4256, its related parts can be found.For high efficiency, the supply voltage should be maintained at [0].In order to store data, EEPROMis used.Surface Mountis the mounting point of this electronic part.A total of 176pins are provided on this board.In this case, the maximum supply voltage is 1.9V.Normally, it operates with a voltage of 1.7VV as its minimum supply voltage.This logic element/block contains 16logic elements.A total of 44programmable I/Os are available.This can be achieved at a frequency of 178.57MHz.In its simplest form, it consists of 36 logic blocks (LABs).Input signals are detected by 4dedicated inputs.
LC4256ZC-75TN176C Features
176-LQFP package
128 I/Os
The operating temperature of 0°C~90°C TJ
176 pin count
176 pins
36 logic blocks (LABs)
LC4256ZC-75TN176C Applications
There are a lot of Lattice Semiconductor Corporation LC4256ZC-75TN176C CPLDs applications.
- Multiple DIP Switch Replacement
- Bootloaders for FPGAs
- I/O expansion
- Multiple Clock Source Selection
- Page register
- ToR/Aggregation/Core Switch and Router
- Wide Vin Industrial low power SMPS
- STANDARD SERIAL INTERFACE UART
- Digital systems
- Code converters
