LC4256ZC-75TN176E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | -40°C~130°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4256 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 341μA |
| Number of I/O | 128 |
| Nominal Supply Current | 341μA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Max Frequency | 200MHz |
| Number of Programmable I/O | 48 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4256ZC-75TN176E Overview
A mobile phone network consists of 256macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).In the 176-LQFPpackage, you will find it.It is programmed with 128 I/Os.It is programmed that device terminations will be 176 .There is a QUADterminal position on the electrical part in question.A voltage of 1.8V is used as the power supply for this device.It is a part of family [0].It is packaged in the way of Tray.Due to its reliability, it is operated at a temperature of [0].There should be a Surface Mounton the chip.In this case, it is a type of FPGA belonging to the ispMACH? 4000Z series.It is programmed with 176 pins.This device can also display [0].The LC4256indicates that its related parts can be found.In order to maintain high efficiency, the supply voltage should be maintained at [0].In general, it is recommended to store data in [0].The electronic component is mounted by Surface Mount.A total of 176pins are provided on this board.It operates with the maximal supply voltage of 1.9V.It operates with the minimal supply voltage of 1.6V.A total of 16logic elements/blocks are present.A total of 48Programmable I/Os are present.It is recommended not to exceed 200MHzin terms of frequency.The status of input signals is determined by 4dedicated inputs.
LC4256ZC-75TN176E Features
176-LQFP package
128 I/Os
The operating temperature of -40°C~130°C TJ
176 pin count
176 pins
LC4256ZC-75TN176E Applications
There are a lot of Lattice Semiconductor Corporation LC4256ZC-75TN176E CPLDs applications.
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Random logic replacement
- Multiple DIP Switch Replacement
- D/T registers and latches
- Software-Driven Hardware Configuration
- Address decoders
- Configurable Addressing of I/O Boards
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Custom state machines
- Page register
