LC4256ZC-75TN176I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4256 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 341μA |
| Number of I/O | 128 |
| Nominal Supply Current | 341μA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 44 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4256ZC-75TN176I Overview
There are 256 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The product is contained in a 176-LQFP package.This device has 128 I/O ports programmed into it.There is a 176terminations set on devices.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.A voltage of 1.8V is used as the power supply for this device.This part is included in Programmable Logic Devices.It is recommended to package the chip by Tray.To ensure reliability, the device operates at a temperature of [0].It is mounted in the way of Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4000Z series.It is equipped with 176 pin count.This device also displays [0].The LC4256shows its related parts.Optimal efficiency requires a supply voltage of [0].Data storage is performed using [0].In this case, it is mounted by Surface Mount.There are 176pins on it.There is a maximum supply voltage of 1.9Vwhen the device is operating.The device is designed to operate with a minimal supply voltage of 1.7VV.16logic elements/blocks exist.Currently, there are 44 Programmable I/Os available.In this case, 178.57MHzis the frequency that can be achieved.Input signals are detected using 4dedicated inputs.There are 36 logic elements/cells on the device.
LC4256ZC-75TN176I Features
176-LQFP package
128 I/Os
The operating temperature of -40°C~105°C TJ
176 pin count
176 pins
LC4256ZC-75TN176I Applications
There are a lot of Lattice Semiconductor Corporation LC4256ZC-75TN176I CPLDs applications.
- Voltage level translation
- Address decoders
- Power Meter SMPS
- State machine design
- DMA control
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Boolean function generators
- POWER-SAVING MODES
- Complex programmable logic devices
