LC4256ZE-5TN144C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000ZE |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 277.78MHz |
| Base Part Number | LC4256 |
| Pin Count | 144 |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 341μA |
| Number of I/O | 96 |
| Nominal Supply Current | 341μA |
| Memory Type | EEPROM |
| Propagation Delay | 5.8 ns |
| Turn On Delay Time | 5.8 ns |
| Number of Logic Elements/Cells | 16 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 14 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4256ZE-5TN144C Overview
A mobile phone network consists of 256macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is embedded in the 144-LQFP package.In this case, there are 96 I/Os programmed.It is programmed that device terminations will be 144 .The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.The power source is powered by 1.8Vvolts.The part belongs to Programmable Logic Devices family.Trayshould be used for packaging the chip.During operation, the operating temperature is kept at 0°C~90°C TJ to ensure its reliability.The chip should be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4000ZE series.A chip with 144pins is programmed.It is also characterized by YES.According to the LC4256, its related parts can be found.For high efficiency, the supply voltage should be maintained at [0].For data storage, EEPROMis adopted.The electronic component is mounted by Surface Mount.A total of 144pins are provided on this board.This device operates at a voltage of 1.9V when the maximum supply voltage is applied.A minimum supply voltage of 1.7V is required for this device to operate.It is possible to achieve a frequency of 277.78MHz.To detect the status of input signals, there are 14dedicated inputs.The fundamental building block consists of 16logic elements/cells.
LC4256ZE-5TN144C Features
144-LQFP package
96 I/Os
The operating temperature of 0°C~90°C TJ
144 pin count
144 pins
LC4256ZE-5TN144C Applications
There are a lot of Lattice Semiconductor Corporation LC4256ZE-5TN144C CPLDs applications.
- DDC INTERFACE
- Storage Cards and Storage Racks
- POWER-SAVING MODES
- Custom state machines
- Address decoders
- D/T registers and latches
- Software Configuration of Add-In Boards
- Parity generators
- Code converters
- Custom shift registers
