LC4256ZE-7MN144I
| Parameters | |
|---|---|
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Height Seated (Max) | 1.1mm |
| Length | 7mm |
| Width | 7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-TFBGA, CSPBGA |
| Number of Pins | 144 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000ZE |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 200MHz |
| Base Part Number | LC4256 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 341μA |
| Number of I/O | 108 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 16 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
LC4256ZE-7MN144I Overview
256macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.A 144-TFBGA, CSPBGA package contains the item.As you can see, this device has 108 I/O ports programmed into it.Terminations of devices are set to [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The power source is powered by 1.8Vvolts.It belongs to the family [0].The chip should be packaged by Tray.The temperature at which it operates is set to -40°C~105°C TJin order to ensure its reliability.The chip should be mounted by Surface Mount.This type of FPGA is a part of the ispMACH? 4000ZE series.It has 144pins programmed.If you use this device, you will also find [0].According to the LC4256, its related parts can be found.Optimal efficiency requires a supply voltage of [0].EEPROM is adopted for storing data.In this case, it is mounted by Surface Mount.This board has 144 pins.In this case, the maximum supply voltage is 1.9V.With a minimal supply voltage of [0], it operates.You can achieve 200MHzfrequencies.There are 4 dedicated inputs used to detect the status of input signals.There are 16 logic elements/cells to form a fundamental building block.
LC4256ZE-7MN144I Features
144-TFBGA, CSPBGA package
108 I/Os
The operating temperature of -40°C~105°C TJ
144 pin count
144 pins
LC4256ZE-7MN144I Applications
There are a lot of Lattice Semiconductor Corporation LC4256ZE-7MN144I CPLDs applications.
- Multiple DIP Switch Replacement
- Portable digital devices
- Power automation
- High speed graphics processing
- Dedicated input registers
- Software-Driven Hardware Configuration
- Wide Vin Industrial low power SMPS
- Digital designs
- Handheld digital devices
- Timing control
