LC4384B-10T176I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4384 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 13.5mA |
| Number of I/O | 128 |
| Nominal Supply Current | 13.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Logic Elements/Cells | 24 |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 48 |
| Output Function | MACROCELL |
| Number of Macro Cells | 384 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 10ns |
| Height Seated (Max) | 1.6mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4384B-10T176I Overview
A mobile phone network consists of 384macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).The item is enclosed in a 176-LQFP package.It is programmed with 128 I/Os.176terminations have been programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.A voltage of 2.5V is used as the power supply for this device.It is a part of the family [0].As a result, it is packaged as Tray.The temperature at which it operates is set to -40°C~105°C TJin order to ensure its reliability.The chip should be mounted by Surface Mount.In terms of FPGAs, it belongs to the ispMACH? 4000B series.176pins are programmed on the chip.This device can also display [0].Its related parts can be found in the [0].It is recommended that the supply voltage be kept at 2.5Vto maximize efficiency.In this case, EEPROMwill be used to store the data.In this case, Surface Mountis used to mount the electronic component.The 176pins are designed into the board.With a maximum supply voltage of [0], it operates.The device is designed to operate with a minimal supply voltage of 2.3VV.A total of 48Programmable I/Os are present.It is recommended that the maximal frequency be lower than 322MHz.There are 4 dedicated inputs used to detect the status of input signals.A fundamental building block of logic consists of 24logic elements/cells.
LC4384B-10T176I Features
176-LQFP package
128 I/Os
The operating temperature of -40°C~105°C TJ
176 pin count
176 pins
LC4384B-10T176I Applications
There are a lot of Lattice Semiconductor Corporation LC4384B-10T176I CPLDs applications.
- I2C BUS INTERFACE
- Preset swapping
- Bootloaders for FPGAs
- Complex programmable logic devices
- ToR/Aggregation/Core Switch and Router
- Digital multiplexers
- ON-CHIP OSCILLATOR CIRCUIT
- Portable digital devices
- Discrete logic functions
- Digital designs
