LC4384B-75FN256I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4384 |
| Pin Count | 256 |
| JESD-30 Code | S-PBGA-B256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 13.5mA |
| Number of I/O | 192 |
| Nominal Supply Current | 13.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 44 |
| Output Function | MACROCELL |
| Number of Macro Cells | 384 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 24 |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
LC4384B-75FN256I Overview
There are 384 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.You can find it in package [0].The device is programmed with 192 I/O ports.It is programmed to terminate devices at [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.It is powered by a voltage of 2.5V volts.The part belongs to Programmable Logic Devices family.It is packaged in the way of Tray.The operating temperature of the machine is -40°C~105°C TJ to ensure its reliability.It is mounted in the way of Surface Mount.The FPGA belongs to the ispMACH? 4000B series.There are 256pins on the chip.This device is also capable of displaying [0].According to the LC4384, its related parts can be found.In order to achieve high efficiency, the supply voltage should be maintained at [0].EEPROM is adopted for storing data.A Surface Mountis mounted on this electronic component.It operates with the maximal supply voltage of 2.7V.A minimum supply voltage of 2.3V is required for this device to operate.A logic element or block has 24elements.There are 44 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. It should be below 322MHzat the maximal frequency.The status of input signals is determined by 4dedicated inputs.
LC4384B-75FN256I Features
256-BGA package
192 I/Os
The operating temperature of -40°C~105°C TJ
256 pin count
LC4384B-75FN256I Applications
There are a lot of Lattice Semiconductor Corporation LC4384B-75FN256I CPLDs applications.
- Reset swapping
- PULSE WIDTH MODULATION (PWM)
- Page register
- I/O PORTS (MCU MODULE)
- Custom state machines
- STANDARD SERIAL INTERFACE UART
- State machine control
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Boolean function generators
- Interface bridging
