LC4384B-75T176C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4384 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 13.5mA |
| Number of I/O | 128 |
| Nominal Supply Current | 13.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 24 |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 48 |
| Output Function | MACROCELL |
| Number of Macro Cells | 384 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.6mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4384B-75T176C Overview
Currently, there are 384 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.In the 176-LQFPpackage, you will find it.The device is programmed with 128 I/O ports.176terminations have been programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.The power supply voltage is 2.5V.There is a part included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].The chip should be mounted by Surface Mount.The FPGA belongs to the ispMACH? 4000B series.Chips are programmed with 176 pins.It is also characterized by YES.There are related parts in [0].If high efficiency is desired, the supply voltage should be kept at [0].For data storage, EEPROMis adopted.In this case, Surface Mountis used to mount the electronic component.There are 176 pins on the device.This device operates at a voltage of 2.7Vas its maximum supply voltage.The minimal supply voltage is 2.3V.In total, there are 48programmable I/Os.It is recommended that the maximal frequency be lower than 322MHz.To detect the status of input signals, there are 4dedicated inputs.Fundamental building blocks consist of 24logic elements/cells.
LC4384B-75T176C Features
176-LQFP package
128 I/Os
The operating temperature of 0°C~90°C TJ
176 pin count
176 pins
LC4384B-75T176C Applications
There are a lot of Lattice Semiconductor Corporation LC4384B-75T176C CPLDs applications.
- ON-CHIP OSCILLATOR CIRCUIT
- Preset swapping
- Programmable power management
- Discrete logic functions
- Software Configuration of Add-In Boards
- POWER-SAVING MODES
- Timing control
- State machine control
- Code converters
- PULSE WIDTH MODULATION (PWM)
