LC4384C-35F256C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4384 |
| Pin Count | 256 |
| JESD-30 Code | S-PBGA-B256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 3.5mA |
| Number of I/O | 192 |
| Nominal Supply Current | 3.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 3.5 ns |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 44 |
| Output Function | MACROCELL |
| Number of Macro Cells | 384 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 3.5ns |
| Number of Logic Elements/Blocks | 24 |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
LC4384C-35F256C Overview
There are 384 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is contained in package [0].The device is programmed with 192 I/O ports.There are 256 terminations programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The device is powered by a voltage of 1.8V volts.This part is in the family [0].It is recommended to package the chip by Tray.The operating temperature of the machine is 0°C~90°C TJ to ensure its reliability.Ensure that the chip is mounted by Surface Mount.This type of FPGA is a part of the ispMACH? 4000C series.Chips are programmed with 256 pins.It is also characterized by YES.The LC4384indicates that related parts can be found.The supply voltage should be maintained at 1.8V for high efficiency.EEPROM is adopted for storing data.This device is mounted by Surface Mount.This device operates at a voltage of 1.95V when the maximum supply voltage is applied.Despite its minimal supply voltage of [0], it is capable of operating.In total, there are 24 logic elements/blocks.A programmable I/O count of 44 has been recorded.It is recommended not to exceed 322MHzin terms of frequency.The status of input signals is detected by 4dedicated inputs.
LC4384C-35F256C Features
256-BGA package
192 I/Os
The operating temperature of 0°C~90°C TJ
256 pin count
LC4384C-35F256C Applications
There are a lot of Lattice Semiconductor Corporation LC4384C-35F256C CPLDs applications.
- Multiple DIP Switch Replacement
- STANDARD SERIAL INTERFACE UART
- D/T registers and latches
- Handheld digital devices
- Multiple Clock Source Selection
- Auxiliary Power Supply Isolated and Non-isolated
- Dedicated input registers
- State machine design
- Synchronous or asynchronous mode
- Wide Vin Industrial low power SMPS
