LC4384C-5FN256I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4384 |
| Pin Count | 256 |
| JESD-30 Code | S-PBGA-B256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 3.5mA |
| Number of I/O | 192 |
| Nominal Supply Current | 3.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 24 |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 48 |
| Output Function | MACROCELL |
| Number of Macro Cells | 384 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 5ns |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
LC4384C-5FN256I Overview
There are 384 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).256-BGAis the package in which it resides.It is programmed with 192 I/Os.It is programmed that device terminations will be 256 .This electrical part is wired with a terminal position of BOTTOM.A voltage of 1.8Vprovides power to the device.It is a part of family [0].As a result, it is packaged as Tray.The temperature at which it operates is set to -40°C~105°C TJin order to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.As part of the ispMACH? 4000Cseries, it is a type of FPGA.There are 256 pins on the chip.When using this device, YESis also available.You can find its related parts in the [0].A high level of efficiency can be achieved by maintaining the supply voltage at [0].For storing data, it is recommended to use [0].Surface Mountis the mounting point of this electronic part.This device operates at a voltage of 1.95Vas its maximum supply voltage.Initially, it requires a voltage of 1.65Vas the minimum supply voltage.In total, there are 48programmable I/Os.It is recommended that the maximum frequency be less than 322MHz.Input signals are detected using 4dedicated inputs.As a fundamental building block, there are 24 logic elements/cells.
LC4384C-5FN256I Features
256-BGA package
192 I/Os
The operating temperature of -40°C~105°C TJ
256 pin count
LC4384C-5FN256I Applications
There are a lot of Lattice Semiconductor Corporation LC4384C-5FN256I CPLDs applications.
- Parity generators
- Address decoding
- Portable digital devices
- Custom state machines
- Random logic replacement
- DMA control
- State machine control
- Code converters
- Boolean function generators
- Interface bridging
