LC4384C-5FTN256C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Number of Pins | 256 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn95.5Ag4.0Cu0.5) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4384 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 3.5mA |
| Number of I/O | 192 |
| Nominal Supply Current | 3.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 24 |
| Max Frequency | 322MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 384 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 5ns |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4384C-5FTN256C Overview
There are 384 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.You can find it in package [0].There are 192 I/Os on the board.It is programmed to terminate devices at [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.It is powered by a voltage of 1.8V volts.There is a part in the family [0].The chip should be packaged by Tray.Ensure its reliability by operating at [0].Chips should be mounted by Surface Mount.In terms of FPGAs, it belongs to the ispMACH? 4000C series.It has 256pins programmed.This device can also display [0].You can find its related parts in the [0].Optimal efficiency requires a supply voltage of [0].For data storage, EEPROMis adopted.The electronic part is mounted by Surface Mount.The 256pins are designed into the board.A maximum voltage of 1.95Vis required for operation.Normally, it operates with a voltage of 1.65VV as its minimum supply voltage.Ideally, the maximal frequency should be lower than 322MHz Hz.The status of input signals is detected by 4dedicated inputs.The fundamental building block consists of 24logic elements/cells.
LC4384C-5FTN256C Features
256-LBGA package
192 I/Os
The operating temperature of 0°C~90°C TJ
256 pin count
256 pins
LC4384C-5FTN256C Applications
There are a lot of Lattice Semiconductor Corporation LC4384C-5FTN256C CPLDs applications.
- Digital multiplexers
- Multiple Clock Source Selection
- Dedicated input registers
- Protection relays
- Synchronous or asynchronous mode
- ToR/Aggregation/Core Switch and Router
- Power up sequencing
- Handheld digital devices
- Preset swapping
- White goods (Washing, Cold, Aircon ,...)
