LC4384C-5TN176I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4384 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 3.5mA |
| Number of I/O | 128 |
| Nominal Supply Current | 3.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 24 |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 44 |
| Output Function | MACROCELL |
| Number of Macro Cells | 384 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 5ns |
| Height Seated (Max) | 1.6mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4384C-5TN176I Overview
The mobile phone network has 384 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).It is contained in package [0].The device is programmed with 128 I/Os.Devices are programmed with terminations of [0].The terminal position of this electrical component is QUAD.The power supply voltage is 1.8V.The part is included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.To ensure its reliability, the operating temperature is set to [0].The chip should be mounted by Surface Mount.In FPGA terms, it is a type of ispMACH? 4000Cseries FPGA.The chip is programmed with 176 pins.If this device is used, you will also be able to find [0].The LC4384indicates that related parts can be found.It is recommended that the supply voltage be kept at 1.8Vto maximize efficiency.Data storage is performed using [0].The electronic component is mounted by Surface Mount.The device is designed with pins [0].A voltage of 1.95V is the maximum supply voltage for this device.A minimum supply voltage of 1.65V is required for this device to operate.There are 44 programmable I/Os in this system.It is recommended that the maximum frequency be less than 322MHz.The status of input signals is detected by 4dedicated inputs.A fundamental building block consists of 24logic elements/cells.
LC4384C-5TN176I Features
176-LQFP package
128 I/Os
The operating temperature of -40°C~105°C TJ
176 pin count
176 pins
LC4384C-5TN176I Applications
There are a lot of Lattice Semiconductor Corporation LC4384C-5TN176I CPLDs applications.
- State machine control
- STANDARD SERIAL INTERFACE UART
- Voltage level translation
- Digital multiplexers
- Handheld digital devices
- DMA control
- Address decoding
- I/O PORTS (MCU MODULE)
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Software-Driven Hardware Configuration
