LC4384C-75T176C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4384 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 3.5mA |
| Number of I/O | 128 |
| Nominal Supply Current | 3.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 56 |
| Output Function | MACROCELL |
| Number of Macro Cells | 384 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 24 |
| Height Seated (Max) | 1.6mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4384C-75T176C Overview
There are 384 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.You can find it in package [0].There are 128 I/Os on the board.There are 176 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The power supply voltage is 1.8V.It is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.Ensure its reliability by operating at [0].Chips should be mounted by Surface Mount.This type of FPGA is a part of the ispMACH? 4000C series.It is programmed with 176 pins.Additionally, this device is capable of displaying [0].There are related parts in [0].Optimal efficiency requires a supply voltage of [0].It is recommended that data be stored in [0].The electronic part is mounted by Surface Mount.It is designed with 176 pins.There is a maximum supply voltage of 1.95V.Normally, it operates with a voltage of 1.65VV as its minimum supply voltage.In total, there are 24 logic elements/blocks.There are 56 programmable I/Os in this system.It is recommended that the maximal frequency be lower than 322MHz.Input signals are detected by 4dedicated inputs.
LC4384C-75T176C Features
176-LQFP package
128 I/Os
The operating temperature of 0°C~90°C TJ
176 pin count
176 pins
LC4384C-75T176C Applications
There are a lot of Lattice Semiconductor Corporation LC4384C-75T176C CPLDs applications.
- Field programmable gate
- ON-CHIP OSCILLATOR CIRCUIT
- Digital systems
- Software Configuration of Add-In Boards
- Dedicated input registers
- USB Bus
- I2C BUS INTERFACE
- INTERRUPT SYSTEM
- Auxiliary Power Supply Isolated and Non-isolated
- ToR/Aggregation/Core Switch and Router
